Whew. That was hard. I’m now officially “under roof”. I knew the roof would be a multi-part series, but it was more long and drawn out than I thought.
I am now far behind my goal for finishing the home in 2-3 years. In fact, I thought back in October that I might be able to finish the roof by the end of 2018. We are now halfway through 2019.
On the bright side, I’m still within budget, and now that the roof is done, I can take a breather and finish projects I left hanging like installing a motor in my pickup. Also, much of the remaining work can be done on the ground – no more dragging construction materials up to the roof. How much did I drag up there? I won’t bore you with the details, but I estimate about 35,000 lbs, not including tar paper, nails, screws and insulation. Along with the ~22,000 pounds of rafters, and the 10,000 pound ridge pole, this puts the weight of the roof around 67,000 pounds.
The shingle elevator saved my back and knees. I put 109 bundles of shingles on the roof. Each bundle weighs about 60 pounds. With the shingle elevator, I was able to load three or four bundles at a time, hook the rope to the car and back up, and then climb the ladder and off-load them onto the roof.
Also, since my roof is not exactly square, I had some issues keeping my shingle lines straight when I got to the ridge. But I noticed when watching some how-to videos that the professionals have issues with non-square roofs as well, so I feel pretty good about my not-perfect roof.
We still need to clean up the inside of the house- I’ve got scraps of foam in there, extra lumber, plywood and a lot of junk leftover from installing the roof. I noticed during a rain storm that the ground on the West side of the house is a bit higher right along the drip line than the ground is inside the house. The rain was running down to the inside of the house. I think I’ll ask the neighbor to bring his disc-harrow over and plow up that side, and then I’ll shovel the dirt to the inside of the house. That way, the inside will be just a bit higher than the outside, forcing the water to run the other direction.
I think the very next step is to trench the sewer, water, and maybe electrical. It’ll certainly be no fun to trench if I wait until after I get the subfloor in. And then I need the floor joists and the hangers, the insulation, etc., etc.
A guy I met in a sawmill group on facebook offered to make my second floor beams for really cheap. He’s in Georgia and said he’ll deliver them. I’m not ready for them, but the price is so good I can’t pass it up. I’d make them myself, but I’m currently out of trees.
Other things that need to be done in no particular order:
- frame in the gables
- install 1st floor
- install 2nd floor
- interior walls
- doors / windows
- pass inspection
Sigh. The really cool part – cutting down trees, making pulleys, stacking the walls, installing the ridge pole, decking the roof- is over. From here on out, it’s almost all just normal 2×4 construction- framing, cabinets, hardwood floors, tile, plumbing, etc.
And sorry, but roof pictures are kind of boring: