Triple Blocks – Details

Another post on pulleys? When I first started lifting logs, I used a chain hoist, some antique #8 pulleys, and some homemade pulleys when I couldn’t find any more antique pulleys. Pulleys that are rated for more than 3,000 pounds are surprisingly hard to find, and the ones you do find can cost over $400 per block. Pulleys are rare because everyone hires a crane or uses a telehandler to lift heavy stuff anymore. If you are having trouble finding a telehandler due to the recent construction boom, you may want to consider using block and tackle. A set of … Continue reading Triple Blocks – Details

2nd floor Tongue and Groove – edge detail

A custom log home is complicated. When we designed the floor plan, we wanted it open between the kitchen and the living area. The only obstacle will be a wood stove and an island. To add a sense of separation between the living and the dining area, we wanted a 2nd floor beam to be the dividing line. Our plans say the 4×12 second floor beams should be spaced 24 inches apart. Normally, you would start at the wall and measure 24″ all the way across, but because the beam acts as a divider between rooms, we set that beam … Continue reading 2nd floor Tongue and Groove – edge detail

Closing in the Gables – Part 1: Framing and sheathing

With the windows and doors almost all installed, we decided to change gears and close in the gables. This part of the house is not structural, so I have more leeway with how to do it. I still used 16″ centers for my framing, though. I decided to frame it in with 2×6’s, since I had almost all the lumber I needed for free from when I was working on the roof and a guy just wanted to get rid of them. The biggest challenge was getting it all up there. My 24′ ladder only reaches the top of the … Continue reading Closing in the Gables – Part 1: Framing and sheathing